how to change your IP address in less then 1 minute.
HERE IS A WAY TO CHANGE YOUR IP ADDRESS IN LESS THEN A MINUTE
Now Change Your IP address in window 7/8
- First of all open your run dialog box.
- And type There "CMD" & hit Enter key.
- A command prompt box will open In Front Of You.
- Type there "ipconfig /release" & hit Enter.
- Type there "ipconfig /renew" & hit Enter
- Now Type "exit" And leave the command prompt window.
To change the IP address automatically Follow the steps:
- Now First of all go to "start">"control panel".
- Right click on "Network and Internet" and then select "Network and Sharing Center". Now choose "Change adapter settings" At the left side of the window.
- Right click on your network card and from the drop-down menu click on "Properties".
- Under the "Networking" tab chose "Internet Protocol Version 4 (TCP/IPv4)" or "Internet Protocol Version 6 (TCP/IPv6)" and then click on "Properties"
- In the another window you will see the option between "Obtain an IP Address Automatically" and "Use the following IP Address"
- You need almost always to select "Obtain an IP Address Automatically" to change IP address automatically. The other option, namely, "Use the following IP Address" is used for manually configuring a proxy server.
- Then, click on "OK". Your IP address should be changed.
How to Change IP Address in Windows Vista
- First of all open your run dialog box.
- And type There "CMD" & hit Enter key.
- A command prompt box will open In Front Of You.
- Type there "ipconfig /release" & hit Enter.
- Type there "ipconfig /renew" & hit Enter
- Now Type "exit" And leave the command prompt window.
HERE IS AN ANOTHER WAY TO CHANGE YOUR IP ADDRESS THROUGH YOUR NETWORK ROUTER:
- .Type in 192.168.1.1 (this may be different) In your browser's address bar.
- Enter your password. If you have not chosen a password, use the factory default password of "admin." No username is required.
- Release the IP address. (Method varies by router manufacturer)
- Go to status.
- Click DHCP Release.
- Under Setup in the grey bar go to Mac Address clone on the blue bar.
- Click enable, then click clone pcs Mac address. Save settings.
- Unplug the modem, but keep the router plugged in.
- With the modem unplugged, go to status.
- Click DHCP renew.
- Plug in modem.
- Wait a for a while (this may take from a few minutes to hours) and press refresh. Your IP address should be changed.
Check Your New IP address here: Check IP Address Here
Now How To Change the IP address In mac OS.
- Close out of any applications that are connected to the Web.
- Click on the Apple menu and choose System Preferences.
- Go to the View menu and choose Network.
- Go to the Show menu and choose Active Network Ports.
- Click to deselect the checkbox for the port you use to connect to the Internet.
- Click Apply Now, reselect the port checkbox and click Apply Now again.
- Open a Web browser and try to connect to a Web page.
- If this doesn't work, power cycling your modem (turning it off, waiting a few seconds and turning it back on) may help.
Check Your New IP address here: Check IP Address Here.
0 comments :